Filter Videos By Company
Vantage Fixtures Designed & Made by MAD
Vandal Resistant: BS Series Button Test
Vandal Resistant: BP Series Button Test
BS/BP Push Button Durability Demo
BS Push Button Waterproof Demo
Glass Demo
MAD4 Gilda Hall Station Mounting Instructions
MAD6 Gilda Hall Station Mounting Instructions
MAD8 Gilda Hall Station Mounting Instructions
Fixture QR Code
DMG Pushbutton Contact Removal
TTG Touchscreen Sales Video Cutdown
MosaicONE VMS Cutdown
MosaicONE VMS
Phantom Touchless Sensor Demo
How Does CleanCab™ by GAL Featuring ActivePure® Technology Work?
Courion Doors
Tricks to Guide Rail Installation
This video is about Tricks to Guide Rail Installation
Elevator Controls
Pixel COP Fixture Wiring Test
This video along with the on board diagnostics, on the P-COP board, provides a step by step procedure on how to verify the wiring on the COP fixture.
Enabling Construction Mode
Video describing how to enable Construction Mode on the Pixel Controller, and which circuits are required to run on Construction Mode
L1000A AutoTune Induction Non-Rotational
Video describing how to perform a Non-Rotational Auto Tune for Induction Motors using a L1000A drive and the Pixel Control System.
L1000A AutoTune for Induction Motors
Video describing how to perform an Auto Tune for Induction Motors using a L1000A drive and the Pixel Control System.
Pixel Main Processor (P-MP) Software Update
Video describing how to update the Pixel Main Processor board from a USB containing the Pixel software.
Pixel System Software Update
Video describing how to update the Pixel System from a USB containing the Pixel software. This video describes how to complete both automated and manual per board software updates.
TOC Box Installation
Video describing how to install the Pixel Top Of Car (TOC) Box of the Pixel Control System.
Pixel Landa Installation
Video describing how to install the Pixel Landa System. Takes a step by step procedure on how to everything about Landa from the Stainless Steel Tape to the Landa Reader Sensors.
GAL
GALaxy IV APS Selector Installation
This video demonstrates the installation procedure for the GALaxy IV APS selector.
GALaxy IV TSSA Test 1 – Motor Contactor
This video demonstrates the procedure for performing GALaxy IV TSSA test procedure 1.1, “Magnetically Operated Devices”, Test 1 for the “Motor Contactor”.
GALaxy IV TSSA Test 2 – Brake Contactors
This video demonstrates the procedure for performing GALaxy IV TSSA test procedure 1.1, “Magnetically Operated Devices”, Test 2 for the “Brake Contactors”.
GALaxy IV TSSA Test 3 – Relays
This video demonstrates the procedure for performing GALaxy IV TSSA test procedure 1.1, “Magnetically Operated Devices”, Test 3 for the “Relays”
GALaxy IV TSSA Test 4 – Emergency Brake Relays
This video demonstrates the procedure for performing GALaxy IV TSSA test procedure 1.1, “Magnetically Operated Devices”, Test 4 for the “EBK” and “EBK1” Emergency Brake Relays.
GALaxy IV TSSA Test 5 – Up and Down Outputs
This video demonstrates the procedure for performing GALaxy IV TSSA test procedure 1.2, “Solid State Devices”, Test 5 for the “UP” and “DNR” outputs.
GALaxy IV TSSA Test 6 – Automatic and Inspection Inputs
This video demonstrates the procedure for performing GALaxy IV TSSA test procedure 1.2, “Solid State Devices”, Test 6 for the Automatic and Inspection Mode Inputs.
GALaxy IV TSSA Test 7 – Door Lock and Car Gate Inputs
This video demonstrates the procedure for performing GALaxy IV TSSA test procedure 1.2, “Solid State Devices”, Test 7 for the Door Lock and Car Gate Inputs.
GALaxy IV TSSA Test 8 – In-CarStop Switch Bypass Outputs
This video demonstrates the procedure for performing GALaxy IV TSSA test procedure 1.2, “Solid State Devices”, Test 8 for the “In-Car Stop Switch Bypass” outputs.
GALaxy IV TSSA Test 9 – SPB Communication
This video demonstrates the procedure for performing GALaxy IV TSSA test procedure 1.2, “Solid State Devices”, Test 9 for the Safety Processor Board CAN BUS communication.
GALaxy IV Normal Brake Test
This video demonstrates the procedure for performing the GALaxy IV “Normal Brake Test” for the Driving- Machine Brake.
GALaxy IV LCD User Interface
This video demonstrates how to navigate through the menu structure for the GALaxy IV LCD user interface.
GALaxy eHydro - Introduction
This video describes the features of the GALaxy eHydro controller.
GALaxy eHydro - Overview
This video describes the components within the GALaxy eHydro controller.
GALaxy eHydro – Fault Log
This video demonstrates how to use the fault log to troubleshoot an intermittent hoistway door interlock issue.
GALaxy eHydro – LCD Interface
This video demonstrates how to navigate through LCD interface.
GALaxy eHydro TSSA Test 2 – RUN Relay
This video demonstrates the procedure for performing GALaxy eHydro TSSA test procedure 181.10, Test 2, for the RUN Relay.
GALaxy eHydro TSSA Test 3 – SD Output
This video demonstrates the procedure for performing GALaxy eHydro TSSA test procedure 181.20, Test 3, for the SD Output.
GALaxy eHydro TSSA Test 5 – DLT Input
This video demonstrates the procedure for performing GALaxy eHydro TSSA test procedure 181.20, Test 5, for the DLT Input.
GALaxy eHydro – Reset Low Oil/Stall Fault
This video demonstrates the procedure for simulating and resetting a Low Oil/Stall Fault on the GALaxy eHydro controller.
Hollister-Whitney
Machine Maintenance Procedures for Hollister-Whitney Elevator Traction Machines
Learn how to disassemble and reassemble an elevator machine, check and set the motor tramming and adjust the gear contact.
Change and Adjust Elevator Machines Brakes
How to change and adjust drum and disc brakes on an elevator machine.
How to Adjust a Hollister-Whitney Overspeed Governor
Learn how to change and adjust an overspeed governor for an elevator.
How to Install and Adjust an Elevator Safety from Hollister-Whitney Elevator
Learn how to install and adjust a Flexible Guide Clamp Safety on an elevator sling.
How to Adjust and Repair Roller Guide Shoes from Hollister-Whitney Elevator
Learn how to adjust and repair Roller Guide Shoes for elevator rails.
Changing a Gear in a Hollister-Whitney Elevator Machine
Learn how to change a gear in a Hollister-Whitney Elevator machine.
Introducing and Installing The Rope Gripper
This video highlights advantages of the Rope Gripper and shows basic installation procedures.
Changing Thrust Bearings on an Elevator Machine
How to change thrust bearings on an elevator traction machine.
Changing a Traction Wheel on a Hollister-Whitney Traction Elevator Machine
Learn how to change a traction wheel on a geared traction elevator machine.